Castable SLA Resin

Materials
>
SLA Photopolymer Resins
>
Castable SLA Resin

Castable SLA Resin

SKU: WAX-05KG-01

$127.50

Unavailable

per item

WAX Grade SLA Resin for both Laser and DLP light sources for use in lost investment casting.

Completely ash free burnout for 450-650 degC range.

Wavelength : 385-405 nm
Cure time : 3s for 120W, <1s for 240W
Suggested layer height : 25-50 um

Net Weight : 0.5 kg

Please follow storage and handling guidelines strictly for proper benefit.

Quantity

Add to Cart

Features

Low Temperature Burn-out

Printed at 40um layer height via OO-KUMA TANTO SLA Printer

OO-KUMA Castable Grade starts burning at 450degC and speeds up rapidly as temperature increases. This behaviour helps in creating mold cavities with cleaner surfaces and completely hollow inner-channels.
Test results show no ash, no residue and no contamination at the mold cavity after burn-out.

Low Viscosity & High Compatibility

OO-KUMA Resins are optimized to work at 401 nm which makes it suitable for all desktop SLA machines.
Both top down and bottom up machines are compatible due to carefully balanced viscosity.
Tank-resin interface coating in bottom up systems is not damaged due to low pull force resulting from lower viscosities.
Settlement times for top down systems are greatly reduced due to low viscosity and high flow of resins.

Resin tank fill simulation for defined viscosity

Fast and Controlled Cure

Fast response of given energy for part cross-section

OO-KUMA Resins are known to be fast curing while preserving control over cure depth. Depending on your setup, half a second cure times are possible at 25um layer heights.