Standart Design Grade SLA Resin for both Laser and DLP light sources.
Wavelength : 385-405 nm
Cure time : 3s for 120W, <1s for 240W
Suggested layer height : 25-50 um
Net Weight : 0.5 kg
Please follow storage and handling guidelines strictly for proper benefit.
Due to high demand, lead time of 1 week may occur.
Look through clearness is a characteristic feature of OO-KUMA Design Grade. While it enables to be coated or painted, it is also suitable to be pigmented beforehand prior to printing.
Enhanced mechanical properties of OO-KUMA Design grade shows 95 ShoreA hardness while preserving high toughness and high glass transition temperature allowing it to be used in most common functional prototyping jobs. |
OO-KUMA Resins are optimized to work at 401 nm which makes it suitable for all desktop SLA machines.
Both top down and bottom up machines are compatible due to carefully balanced viscosity. Tank-resin interface coating in bottom up systems is not damaged due to low pull force resulting from lower viscosities. Settlement times for top down systems are greatly reduced due to low viscosity and high flow of resins. |
Company & Service |
|
Locations
USA
2035 Sunset Lake Road, Suite B-2 Newark 19702 New Castle DE USA Turkey ITU Ari Teknokent 1 No: 2/5/7 Resitpasa Mah. Katar Cad. 34467 Maslak Sariyer Istanbul Turkey |